Dell Force10 S4810P, Справочное руководство

Страница: 300 / 1637

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If you do not use the
ge
or
le
options, only packets with an exact match to the prefix are
filtered.
Related
Commands
permit – configures a filter to pass packets.
seq – configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
C-Series, E-Series, S-Series, Z-Series
Syntax ip prefix-list prefix-name
To delete a prefix list, use the
no ip prefix-list prefix-name
command.
Parameters
prefix-name Enter a string up to 16 characters long as the name of the prefix list,
up to 140 characters long.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria. For related RIP
commands supported on C-Series and E-Series, refer to
Routing Information Protocol (RIP) . For
related OSPF commands supported on all three platforms, refer to the Open Shortest Path First
(OSPFv2 and OSPFv3) section in the
E-Series FTOS Command Line Reference Guide
.
Related
Commands
show ip route list – displays IP routes in an IP prefix list.
show ip prefix-list summary – displays a summary of the configured prefix lists.
300