Dell Force10 S4810P, Справочное руководство

Страница: 1075 / 1637

Version 7.4.1.0 Introduced on the E-Series.
protocol lldp (Configuration)
Enable the LLDP globally on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax protocol lldp
To disable LLDP globally on the chassis, use the
no protocol lldp
command.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
protocol lldp (Interface)
Enter the LLDP protocol in INTERFACE mode.
C-Series, E-Series, S-Series, Z-Series
Syntax [no] protocol lldp
To return to the global LLDP configuration mode, use the
no protocol lldp
command
from Interface mode.
Defaults LLDP is not enabled on the interface.
Command Modes INTERFACE (conf-if- interface -lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Usage
Information
Before LLDP can be configured on an interface, it must be enabled globally from
CONFIGURATION mode. This command places you in LLDP mode on the interface; it does not
enable the protocol.
When you enter the
LLDP
protocol in the Interface context, it overrides global configurations.
When you execute the
no protocol lldp
from INTERFACE mode, interfaces begin to
inherit the configuration from global LLDP CONFIGURATION mode.
1075