Dell Force10 S4810P, Справочное руководство

Страница: 813 / 1637

Related
Commands ecmp-group – configures a mechanism to monitor traffic distribution.
shutdown
Disable an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax shutdown
To activate an interface, use the
no shutdown
command.
Defaults The interface is disabled.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The
shutdown
command marks a physical interface as unavailable for traffic. To discover if
an interface is disabled, use the
show ip interface brief
command. Disabled
interfaces are listed as down.
Disabling a VLAN or a port channel causes different behavior. When a VLAN is disabled, the
Layer 3 functions within that VLAN are disabled. Layer 2 traffic continues to flow. Entering the
shutdown
command on a port channel disables all traffic on the port channel and the
individual interfaces within the port channel. To enable a port channel, you must enter
no
shutdown
on the port channel interface and at least one interface within that port channel.
The
shutdown
and
description
commands are the only commands that you can
configure on an interface that is a member of a port channel.
Related
Commands
interface port-channel – creates a port channel interface.
interface vlan – creates a VLAN.
show ip interface – displays the interface routing status. Add the keyword
brief
to display a
table of interfaces and their status.
813