Dell Force10 S4810P, Справочное руководство

Страница: 869 / 1637

static routes and the Management Connected prefix are not reflected in the hardware routing
tables. Separate routing tables are maintained for IPv4 and IPv6 management routes. This
command manages both tables.
Related
Commands
interface ManagementEthernet – configures the Management port on the system (either the
Primary or Standby RPM).
duplex (Management) – sets the mode of the Management interface.
speed (Management interface) – sets the speed for the Management interface.
show arp
Display the ARP table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show arp [vrf vrf name ][interface interface | ip ip-address
[ mask ] | macaddress mac-address [ mac-address mask ]] [cpu {cp |
rp1 | rp2}] [static | dynamic] [summary]
Parameters
vrf name E-Series Only: Show only the ARP cache entries tied to the VRF
process.
cpu (OPTIONAL) Enter the keyword
cpu
with one of the following
keywords to view ARP entries on that CPU:
•
cp
- view ARP entries on the control processer.
•
rp1
- view ARP entries on Routing Processor 1.
•
rp2
- view ARP entries on Routing Processor 2.
interface
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For the Management interface, enter the keyword
managementethernet
followed by the slot/port
information.
• For a Port Channel interface, enter the keyword
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
869