Dell Force10 S4810P, Справочное руководство

Страница: 1144 / 1637

Usage
Information In the Dell Force10 operating software (FTOS),
cost
is defined as reference bandwidth/
bandwidth.
Related
Commands area stub – creates a stub area.
area nssa
Specify an area as a not so stubby area (NSSA).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax area area-id nssa [default-information-originate] [no-
redistribution] [no-summary]
To delete an NSSA, use the
no area area-id nssa
command.
Parameters
area-id
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a
number from zero (0) to 65535.
no-redistribution (OPTIONAL) Specify that the
redistribute
command should not
distribute routes into the NSSA. You should only use this command in
a NSSA area border router (ABR).
default-
information-
originate (OPTIONAL) Allows external routing information to be imported into
the NSSA by using Type 7 default.
no-summary (OPTIONAL) Specify that no summary LSAs should be sent into the
NSSA.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
area range
Summarize routes matching an address/mask at an area border router (ABR).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax area area-id range ip-address mask [not-advertise]
1144