Dell Force10 S4810P, Справочное руководство

Страница: 962 / 1637

iscsi profile-compellant
Configure the auto-detection of Dell Compellent arrays on a port.
S4810
Syntax iscsi profile-compellent
Defaults Dell Compellent disk arrays are not detected.
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
iscsi target port
Configure the iSCSI target ports and optionally, the IP addresses on which iSCSI communication is monitored.
S4810
Syntax iscsi target port [ tcp-port-2...tcp-port-16 ]ip-address [ ip-
address ]
To remove the configured iSCSI target ports or IP addresses, use the
no iscsi target
port
command.
Parameters
tcp-
port-2...tcpport-
16
Enter the tcp-port number of the iSCSI target ports. The
tcp-port-
n
is the TCP port number or a list of TCP port numbers on which the
iSCSI target listens to requests. Separate port numbers with a
comma. The default is 860, 3260.
ip-address
(Optional) Enter the ip-address that the iSCSI monitors. The ip-address specifies
the IP address of the iSCSI target.
Defaults 860, 3260
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage
Information
You can configure up to 16 target TCP ports on the switch in one command or multiple
commands.
When you use the
no iscsi target port
command and the TCP port to be deleted is
one bound to a specific IP address, the IP address value must be included in the command.
962