Dell Force10 S4810P, Справочное руководство

Страница: 312 / 1637

match origin
Configure a filter to match routes based on the value found in the BGP path ORIGIN attribute.
C-Series, E-Series, S-Series, Z-Series
Syntax match origin {egp | igp | incomplete}
To disable matching filter, use the
no match origin {igp | egp | incomplete}
command.
Parameters
egp Enter the keyword
egp
to match routes originating outside the AS.
igp Enter the keyword
igp
to match routes originating within the same
AS.
incomplete Enter the keyword
incomplete
to match routes with incomplete
routing information.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
6.1.1.0 Introduced on the E-Series.
match route-type
Configure a filter to match routes based on the how the route is defined.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax match route-type {external [type-1 | type-2] | internal |
level-1 | level-2 | local}
To delete a match, use the
no match route-type {local | internal |
external [type-1 | type-2] | level-1 | level-2}
command.
Parameters
external [type-1|
type-2] Enter the keyword
external
and then enter either type-1 or type-2
to match only on OSPF Type 1 routes or OSPF Type 2 routes.
internal Enter the keyword
internal
to match only on routes generated
within OSPF areas.
level-1 Enter the keyword
level-1
to match IS-IS Level 1 routes.
level-2 Enter the keyword
level-2
to match IS-IS Level 2 routes.
local Enter the keyword
local
to match only on routes generated within
the switch.
312