Dell Force10 S4810P, Справочное руководство

Страница: 188 / 1637

The
save
option works with other filtering commands. This allows you to save specific
information of a
show
command. The
save
entry must always be the last option. For example:
FTOS#show tech-support |grep regular-expression |except
regular-expression | find regular-expression | save flash://
result
This display output is an accumulation of the same information that is displayed when you
execute one of the following show commands:
•
show cam-profile
•
show cam-ipv4flow
•
show chassis
•
show clock
•
show environment
•
show file-system
•
show interface
•
show inventory
•
show ip management-route
•
show ip protocols
•
show ip route summary
•
show processes cpu
•
show processes memory
•
show redundancy
•
show rpm
•
show running-conf
•
show sfm
•
show version
Example (C-
Series)
FTOS#show tech-support page
----------- show version --------------------------
Dell Force10 Networks Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: FTOS 7.5.1.0
Copyright (c) 1999-2007 by Force10 Networks, Inc.
Build Time: Tue Sep 12 15:39:17 IST 2006
Build Path: /sites/maa/work/sw//C-SERIES/SW/SRC
Dell Force10 uptime is 18 minutes
System image file is "/work/sw/IMAGES/Chassis/C300-ODC-2/FTOS-
CS.bin"
Chassis Type: C300
Control Processor: IBM PowerPC 750FX (Rev D2.2) with
1073741824 bytes of memory.
128K bytes of non-volatile configuration memory.
1 Route Processor/Switch Fabric Module
2 48-port GE 10/100/1000Base-T line card with RJ45 interface
(CB)
1 FastEthernet/IEEE 802.3 interface(s)
96 GigabitEthernet/IEEE 802.3 interface(s)
---------- show HA information -------------------
188