Dell Force10 S4810P, Справочное руководство

Страница: 851 / 1637

Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
ip domain-list
Configure names to complete unqualified host names.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip domain-list name
To remove the name, use the
no ip domain-list name
command.
Parameters
name
Enter a domain name to be used to complete unqualified names (that
is, incomplete domain names that cannot be resolved).
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Usage
Information Configure the
ip domain-list
command up to six times to configure a list of possible
domain names.
If you configure both the
ip domain-name
and
ip domain-list
commands, the
software tries to resolve the name using the
ip domain-name
command. If the name is not
resolved, the software goes through the list of names configured with the
ip domain-list
command to find a match.
Use the following steps to enable dynamic resolution of hosts:
• specify a domain name server with the
ip name-server
command
• enable DNS with the
ip domain-lookup
command
To view current bindings, use the
show hosts
command. To view DNS related
configuration, use the
show running-config resolve
command.
Related
Commands ip domain-name – specifies a DNS server.
851