Dell Force10 S4810P, Справочное руководство

Страница: 495 / 1637

Version 7.7.1.0 Introduced on the C-Series.
Version 7.2.1.0 Introduced on the E-Series TeraScale.
debug ip bgp
Allows you to view all information on BGP, including BGP events, keepalives, notifications, and updates.
C-Series, E-Series
Syntax debug ip bgp [ ipv6-address | peer-group peer-group-name ] [in |
out]
To disable all BGP debugging, use the
no debug ip bgp
command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group peer-
group-name
Enter the keywords
peer-group
followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword
in
to view only information on
inbound BGP routes.
out (OPTIONAL) Enter the keyword
out
to view only information on
outbound BGP routes.
Command Modes EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
To view information on both incoming and outgoing routes, do not include the
in
and
out
parameters in the
debugging
command. The
in
and
out
parameters cancel each other; for
example, if you enter
debug ip bgp in
and then enter
debug ip bgp out
, you will
not see information on the incoming routes.
Entering a
no debug ip bgp
command removes all configured debug commands for BGP.
Related
Commands
• debug ip bgp events – view information about BGP events.
• debug ip bgp keepalives – view information about BGP keepalives.
• debug ip bgp notifications – view information about BGP notifications.
• debug ip bgp updates – view information about BGP updates.
495