Dell Force10 S4810P, Справочное руководство

Страница: 378 / 1637

prefix-list
prefix-
list-name
(OPTIONAL) Enter the keyword
prefix-list
followed by the
name of an established prefix list. If the prefix list is not configured,
the default is permit (to allow all routes).
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name
(OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Enter the
no debug ip bgp
command to remove all configured debug commands for BGP.
default-metric
Allows you to change the metric of redistributed routes to locally originated routes. Use this command with the
redistribute
command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax default-metric number
To return to the default setting, use the
no default-metric
command.
Parameters
number
Enter a number as the metric to be assigned to routes from other
protocols. The range is 1 to 4294967295.
Defaults 0
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The
default-metric
command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED)
attribute for redistributed routes only.
Related
Commands
bgp always-compare-med – enables comparison of all BGP MED attributes.
redistribute – redistributes routes from other routing protocols into BGP.
378