Dell Force10 S4810P, Справочное руководство

Страница: 1332 / 1637

NOTE: This option is available under
policy-map-input
only.
qos-policy
qos-
policy-name
(OPTIONAL) Enter the keywords
qos-policy
followed by the QoS
policy name assigned to the queue in text format (16 characters
maximum). This specifies the input QoS policy assigned to the queue
under
policy-map-input
and output QoS policy under
policy-map-output
context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information There are eight (8) queues per interface on the E-Series and four (4) queues per interface on
the C-Series and S-Series. This command assigns a class map or QoS policy to different
queues.
Related
Commands
class-map – identifies the class map.
service-policy input – applies an input policy map to the selected interface.
service-policy output – applies an output policy map to the selected interface.
set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set {ip-dscp value | mac-dot1p value }
Parameters
ip-dscp value (OPTIONAL) Enter the keywords
ip-dscp
followed by the IP DSCP
value. The range is 0 to 63.
mac-dot1p
value
Enter the keywords
mac-dot1p
followed by the dot1p value. The
range is 0 to 7. On the C-Series and S-Series, the allowed values are:
0, 2, 4, 6.
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-in)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
1332