Dell Force10 S4810P, Справочное руководство

Страница: 1146 / 1637

Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information Use this command to configure all routers and access servers within a stub.
Related
Commands
router ospf – enters ROUTER OSPF mode to configure an OSPF instance.
area virtual-link
Set a virtual link and its parameters.
C-Series, E-Series, S-Series
Syntax area area-id virtual-link router-id [[authentication-key
[ encryption-type ] key ] | [message-digest-key keyid md5
[ encryption-type ] key]] [dead-interval seconds ] [hello-interval
seconds ] [retransmit-interval seconds ] [transmit-delay seconds ]
To delete a virtual link, use the
no area area-id virtual-link router-id
command.
To delete a parameter of a virtual link, use the
no area area-id virtual-link
router-id [[authentication-key [ encryption-type ] key ] |
[message-digest-key keyid md5 [ encryption-type ] key ]] [dead-
interval seconds ] [hello-interval seconds ] [retransmit-interval
seconds ] [transmit-delay seconds]
command syntax.
Parameters
area-id
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a
number from zero (0) to 65535.
router-id
Specify an ID (IP address in dotted decimal format) associated with a
virtual link neighbor.
authentication-
key [
encryption-
type
]
key
|
message-digest-
key
keyid
md5
[
encryption-type
]
key
(OPTIONAL) Choose between two authentication methods:
• Enter the keywords
authentication-key
to enable
simple authentication followed by an alphanumeric string up
to eight characters long. Optionally, for the
encryption-
type
variable, enter the number seven before entering the
key
string to indicate that an encrypted password will
follow.
• Enter the keywords
message-digest-key
followed by a
number from 1 to 255 as the
keyid
. After the
keyid
, enter
1146