Dell Force10 S4810P, Справочное руководство

Страница: 729 / 1637

warm]:hitless
Proceed with warm upgrade [confirm yes/no]:
Example (sfm)
FTOS#redundancy force-failover sfm 0
%TSM-6-SFM_FAILOVER: Standby switch to SFM 8
Standby switch to SFM 0
FTOS#
redundancy primary
Set an RPM as the primary RPM.
C-Series, E-Series, S4810
Syntax redundancy primary [rpm0 | rpm1]
To delete a configuration, use the
no redundancy primary
command.
Parameters
rpm0 Enter the keyword
rpm0
to set the RPM in slot R0 as the primary
RPM.
rpm1 Enter the keyword
rpm1
to set the RPM in slot R1 as the primary
RPM.
Default The RPM in slot R0 is the Primary RPM.
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
redundancy protocol
Enable hitless protocols.
C-Series, E-Series, S4810
Syntax redundancy protocol {lacp | xstp}
To disable a hitless protocol, use the
no redundancy protocol {lacp | xstp}
command.
729