Dell Force10 S4810P, Справочное руководство

Страница: 243 / 1637

and 254 is the lowest; lower order numbers have a higher priority). If
you do not use the keyword
order
, the ACLs have the lowest order
by default (255).
monitor (OPTIONAL) Enter the keyword
monitor
when the rule is describing
the traffic that you want to monitor and the ACL in which you are
creating the rule is applied to the monitored interface.
NOTE: For more information, refer to the “Flow-based Monitoring”
section in the Port Monitoring chapter of the
FTOS Configuration
Guide
.
Defaults Not configured.
Command Modes CONFIGURATION-STANDARD-ACCESS-LIST
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Add the DSCP value for ACL matching.
Version 8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
Version 6.5.10 Expanded to include the optional QoS
order
priority for the ACL
entry.
Usage
Information
The
order
option is relevant in the context of the Policy QoS feature only. For more
information, refer to the “Quality of Service” chapter of the
FTOS Configuration Guide
.
When you use the
log
option, the CP processor logs details about the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may become
busy as it has to log these packets’ details.
The
monitor
option is relevant in the context of flow-based monitoring only. For more
information, refer to Port Monitoring
The C-Series and S-Series cannot count both packets and bytes; when you enter the count
byte options, only bytes are incremented.
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
Related
Commands
deny – Assigns a IP ACL filter to deny IP packets.
ip access-list standard – creates a standard ACL.
243