Dell Force10 S4810P, Справочное руководство

Страница: 405 / 1637

Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced the ability to substitute IGP cost for MED when a peer/
peer-group outbound route-map is set as internal.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
With FTOS version 8.3.1.0 and later, you can use the
redistribute
command to advertise
the IGP cost as the MED on redistributed routes. When you set the route-map with metric-type
internal and applied outbound to an EBGP peer/peer-group, the advertised routes
corresponding to those peer/peer-group have the IGP cost set as MED.
If you do not configure the
default-metric
command, in addition to the
redistribute
command, or there is no route map to set the metric, the metric for redistributed static and
connected is “0”.
To redistribute the default route (0.0.0.0/0), configure the
neighbor default-
originate
command.
Related
Commands neighbor default-originate – injects the default route.
redistribute isis
Redistribute IS-IS routes into BGP.
E-Series
Syntax redistribute isis [ WORD ][level-1| level-1-2 | level-2] [metric
metric-value ] [route-map map-name ]
To return to the default values, enter the
no redistribute isis [ WORD ][level-1|
level-1-2 | level-2] [metric metric-value ] [route-map map-name ]
command.
Parameters
WORD
ISO routing area tag.
level-1 (OPTIONAL) Enter the keyword
level-1
to independently
redistributed into Level 1 routes only.
level-1-2 (OPTIONAL) Enter the keyword
level-1-2
to independently
redistributed into Level 1 and Level 2 routes. This is the default.
level-2 (OPTIONAL) Enter the keyword
level-2
to independently
redistributed into Level 2 routes only.
metric
metric-
value
(OPTIONAL) Enter the keyword
metric
followed by the metric value
used for the redistributed route. Use a metric value that is consistent
405