Dell Force10 S4810P, Справочное руководство

Страница: 754 / 1637

ip igmp snooping last-member-query-interval
The last member query interval is the maximum response time inserted into Group-Specific queries sent in response to
Group-Leave messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip igmp snooping last-member-query-interval milliseconds
To return to the default value, use the
no ip igmp snooping last-member-query-
interval
command.
Parameters
milliseconds
Enter the interval in milliseconds. The range is 100 to 65535. The
default is 1000 milliseconds.
Defaults 1000 milliseconds
Command Modes INTERFACE VLAN
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information This last-member-query-interval is also the interval between successive Group-Specific Query
messages. Use this command to change the last-member-query interval.
ip igmp snooping mrouter
Statically configure a VLAN member port as a multicast router interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip igmp snooping mrouter interface interface
To delete a specific multicast router interface, use the
no igmp snooping mrouter
interface interface
command.
Parameters
interface
interface
Enter the following keywords and slot/port or number information:
• For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
754