Dell Force10 S4810P, Справочное руководство

Страница: 788 / 1637

Version 6.1.1.0 Introduced on the E-Series.
Example
FTOS(conf)#interface range gigabitethernet 1/1 - 2
FTOS(conf-if-range-gi-1/1-2)#show config
!
interface GigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface GigabitEthernet 1/2
no ip address
switchport
no shutdown
FTOS(conf-if-range-gi-1/1-2)#
show interfaces
Display information on a specific physical interface or virtual interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show interfaces interface
Parameters
interface Enter one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Loopback interface, enter the keyword
loopback
followed by a number from 0 to 16383.
• For the management interface on an RPM, enter the keyword
ManagementEthernet
followed by the slot/port
information. The slot range is 0 to 1 and the port range is 0.
• For a Null interface, enter the keywords
null 0
.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/port.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN interface, enter the keyword
vlan
followed by a
number from 1 to 4094.
Command Modes
• EXEC
788