Dell Force10 S4810P, Справочное руководство

Страница: 291 / 1637

Usage
Information
When you use the
log
option, the CP processor logs details about the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may become
busy as it has to log these packets’ details.
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
Related
Commands
deny – configures a MAC ACL filter to drop packets.
seq – configure a MAC ACL filter with a specified sequence number.
seq
Assign a sequence number to a deny or permit filter in a MAC access list while creating the filter.
C-Series, E-Series, S-Series, Z-Series
Syntax seq sequence-number {deny | permit} {any | mac-source-address
[ mac-source-address-mask ]} [count [byte]] [log] [monitor]
To remove this filter, use the
no seq sequence-number
command.
Parameters
sequence-
number
Enter a number between 0 to 65535.
deny Enter the keyword
deny
to configure a filter to drop packets meeting
this condition.
permit Enter the keyword
permit
to configure a filter to forward packets
meeting this criteria.
any Enter the keyword
any
to filter all packets.
mac-source-
address Enter a MAC address in nn:nn:nn:nn:nn:nn format.
mac-source-
address-mask (OPTIONAL) Specify which bits in the MAC address must match. If no
mask is specified, a mask of 00:00:00:00:00:00 is applied (in other
words, the filter allows only MAC addresses that match).
count (OPTIONAL) Enter the keyword
count
to count packets the filter
processes.
byte (OPTIONAL) Enter the keyword
byte
to count bytes the filter
processes.
log (OPTIONAL, E-Series only) Enter the keyword
log
to log the packets.
monitor (OPTIONAL) Enter the keyword
monitor
when the rule is describing
the traffic that you want to monitor and the ACL in which you are
creating the rule is applied to the monitored interface.
NOTE: For more information, refer to the “Flow-based Monitoring”
section in the Port Monitoring chapter of the
FTOS Configuration
Guide .
291