Dell Force10 S4810P, Справочное руководство

Страница: 1526 / 1637

Related
Commands
• reload – reboots FTOS.
• reset stack-unit – resets the designated S-Series stack member.
• show system (S-Series) – displays the current status of all stack members or a specific
member.
stack-unit stack-group
Configure the stacking unit and stacking group by specifying an ID when adding units to a stack to ensure the unit is
assigned to the correct group.
S4810
Syntax stack-unit unit-id stack-group stack-group-id
To remove the current stack group configuration, use the
no stack-unit unit-id
stack-group stack-id
command.
Parameters
unit-id
Enter the stack unit ID.
stack-group-id
Enter the stack group ID. The range is 0 to 1615.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Reset command mode from EXEC to CONFIGURATION.
Version 8.3.10.2 Introduced on the S4810.
Usage
Information The following message displays to confirm the command.
WARNING: Setting ports Fo 0/60 as stack group will make their interface configs obsolete
after a reload.[confirm yes/no]: If “y” is entered, all non-default configurations on any
member ports of the current stack group will be removed when the unit is rebooted.
NOTE: Any scripts used to streamline the stacking configuration process must be updated
to reflect the Command Mode change from EXEC Privilege to CONFIGURATION to allow
the scripts to work correctly.
1526