Dell Force10 S4810P, Справочное руководство

Страница: 481 / 1637

Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
The autonomous systems configured in this command are visible to the EBGP neighbors. Each
autonomous system is fully meshed and contains a few connections to other autonomous
systems. The next hop, MED, and local preference information is preserved throughout the
confederation.
FTOS accepts confederation EBGP peers without a LOCAL_PREF attribute. The software sends
AS_CONFED_SET and accepts AS_CONFED_SET and AS_CONF_SEQ.
bgp confederation peers
Specify the autonomous systems (ASs) that belong to the BGP confederation.
C-Series, E-Series
Syntax bgp confederation peers as-number [ ...as-number ]
To cancel this command, use the
no bgp confederation peer
command.
Parameters
as-number
Enter the AS number. The range is 1 to 65535.
...as-number
(OPTIONAL) Enter up to 16 confederation numbers. The range is 1 to
65535.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
The autonomous systems configured in this command are visible to the EBGP neighbors. Each
autonomous system is fully meshed and contains a few connections to other autonomous
systems.
After specifying autonomous systems numbers for the BGP confederation, recycle the peers to
update their configuration.
Related
Commands bgp confederation identifier – configures a confederation ID.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
C-Series, E-Series
Syntax bgp dampening [ half-life reuse suppress max-suppress-time ]
[route-map map-name ]
481