Dell Force10 S4810P, Справочное руководство

Страница: 1424 / 1637

Related
Commands
password – specifies a password for users on terminal lines.
show running-config – views the current configuration.
RADIUS Commands
The following RADIUS commands are supported by FTOS.
debug radius
View RADIUS transactions to assist with troubleshooting.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug radius
To disable debugging of RADIUS, use the
no debug radius
command.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0 Introduced on the E-Series.
ip radius source-interface
Specify an interface’s IP address as the source IP address for RADIUS connections.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip radius source-interface interface
To delete a source interface, use the
no ip radius source-interface
command.
Parameters
interface
Enter the following keywords and slot/port or number information:
• For a 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Loopback interfaces, enter the keyword
loopback
followed by a number from zero (0) to 16838.
• For the Null interface, enter the keywords
null 0
.
1424