Dell Force10 S4810P, Справочное руководство

Страница: 156 / 1637

1 5 SFP 1000BASE-SX B320210155 Yes
1 6 SFP 1000BASE-SX B342232168 Yes
1 7 SFP 1000BASE-SX H11VJ8F Yes
1 8 SFP 1000BASE-SX AJUR367 Yes
1 9 SFP 1000BASE-SX AJLH367 Yes
1 10 Media not present or accessible
1 11 Media not present or accessible
1 12 SFP 1000BASE-SX P11DCP3 Yes
!----------------- output truncated ---------!
Related
Commands
show interfaces – displays a specific interface configuration.
show interfaces transceiver – displays the physical status and operational status of an
installed transceiver. The output also displays the transceiver’s serial number.
show inventory (S-Series and Z-Series)
Display the S-Series or Z-Series switch type, components (including media), and FTOS version, including hardware
identification numbers and configured protocols.
S-Series, Z-Series
Syntax show inventory [media slot ]
Parameters
media
slot
(OPTIONAL) Enter the keyword
media
followed by the stack ID of the
stack member for which you want to display pluggable media
inventory.
NOTE: This parameter is available but not supported in FTOS
version 8.3.11.4. Because stacking is not supported, if you use this
parameter, the output displays “Media not present or accessible”
(refer to the
Usage Information
section).
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4 optics.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced this version of the command for S-Series. S-Series output
differs from E-Series.
Usage
Information If there are no fiber ports in the unit, just the header under show inventory media displays. If
there are fiber ports but no optics inserted, the output displays Media not present or
accessible .
Example (S-
Series)
FTOS#show inventory
System Name : S50v
system Mode : 1.0
156