Dell Force10 S4810P, Справочное руководство

Страница: 604 / 1637

The following describes the
show interface pfc summary
command shown in the
Example below.
Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on
Admin is enabled PFC admin mode is on or off with a list of the configured PFC
priorities. When the PFC admin mode is on, PFC advertisements are
enabled to be sent and received from peers; received PFC
configuration will take effect. The admin operational status for a
DCBX exchange of PFC configuration is enabled or disabled.
Remote is enabled,
Priority list Remote
Willing Status is
enabled Operational status (enabled or disabled) of peer device for DCBX
exchange of PFC configuration with a list of the configured PFC
priorities. Willing status of peer device for DCBX exchange (Willing
bit received in PFC TLV): enabled or disable.
Local is enabled DCBX operational status (enabled or disabled) with a list of the
configured PFC priorities.
Operational status
(local port) Port state for current operational PFC configuration:
•
Init
: Local PFC configuration parameters were exchanged
with the peer.
•
Recommend
: Remote PFC configuration parameters were
received from the peer.
•
Internally propagated
: PFC configuration
parameters were received from the configuration source.
PFC DCBX Oper
status Operational status for the exchange of the PFC configuration on the
local port: match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of the PFC
parameters: Feature — for legacy DCBX versions; Symmetric — for
an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority
TLV: FCOE TLV Tx
Status Status of FCoE advertisements in application priority TLVs from the
local DCBX port: enabled or disabled.
Application Priority
TLV: SCSI TLV Tx
Status Status of ISCSI advertisements in application priority TLVs from the
local DCBX port: enabled or disabled.
Application Priority
TLV: Local FCOE
Priority Map Priority bitmap the local DCBX port uses in FCoE advertisements in
application priority TLVs.
Application Priority
TLV: Local ISCSI
Priority Map Priority bitmap the local DCBX port uses in ISCSI advertisements in
application priority TLVs.
604