Dell Force10 S4810P, Справочное руководство

Страница: 1380 / 1637

To remove RMON MIB statistics collection on an interface, use the
no rmon collection
statistics {controlEntry integer }
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON group of
statistics using a value. Then enter an integer value from 1 to 65535
that identifies the RMON Statistic Table. The integer value must be a
unique in the RMON statistic table.
owner
name
(OPTIONAL) Enter the keyword
owner
followed by the owner name
to record the owner of the RMON group of statistics.
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon event number [log] [trap community ] [description string ]
[owner name]
To disable RMON on an interface, use the
no rmon event number [log] [trap
community ] [description string ]
command.
Parameters
number Assign an event number in integer format from 1 to 65535. The number
value must be unique in the RMON event table.
log (OPTIONAL) Enter the keyword
log
to generate an RMON log entry.
The log entry is triggered and sets the eventType in the RMON MIB to
log or log-and-trap. The default is No log.
trap
community
(OPTIONAL) Enter the keyword
trap
followed by an SNMP
community string to configure the eventType setting in the RMON
MIB. This sets either snmp-trap or log-and-trap. The default is public.
description string (OPTIONAL) Enter the keyword
description
followed by a string
describing the event.
1380