Dell Force10 S4810P, Справочное руководство

Страница: 1485 / 1637

snmp-server contact
Configure contact information for troubleshooting this SNMP node.
C-Series, E-Series, S-Series, Z-Series
Syntax snmp-server contact text
To delete the SNMP server contact information, use the
no snmp-server contact
command.
Parameters
text
Enter an alphanumeric text string, up to 55 characters long.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
snmp-server enable traps
Enable SNMP traps.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax snmp-server enable traps [ notification-type ] [ notification-
option ]
To disable traps, use the
no snmp-server enable traps [ notification-
type ] [ notification-option ]
command.
Parameters
notification-type
Enter the type of notification from the list below:
•
bgp
—Notification of changes in the BGP process.
•
config
—Notification of changes to the startup or running
configuration.
•
ecfm
—Notification of changes to ECFM.
•
ecmp
—Enable an ECMP trap to notify of ECMP or link
bumdle traffic imbalances.
•
envmon
—For Dell Force10 device notifications when an
environmental threshold is exceeded.
•
isis
—Notification of intermediate service traps.
•
lacp
—Notification of changes.
1485