Dell Force10 S4810P, Справочное руководство

Страница: 397 / 1637

neighbor route-reflector-client
Configure the router as a route reflector and the specified neighbors as members of the cluster.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor { ip-address | peer-group-name } route-reflector-client
To remove one or more neighbors from a cluster, use the
no neighbor { ip-address |
peer-group-name } route-reflector-client
command. If you delete all
members of a cluster, you also delete the route-reflector configuration on the router.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
All routers in the peer group receive routes from a route reflector.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
A route reflector reflects routes to the neighbors assigned to the cluster. Neighbors in the
cluster do not need not be fully meshed. By default, when you use
no route reflector
,
the internal BGP (IBGP) speakers in the network must be fully meshed.
The first time you enter this command, the router configures as a route reflector and the
specified BGP neighbors configure as clients in the route-reflector cluster.
When you remove all clients of a route reflector using the
no neighbor route-
reflector-client
command, the router no longer functions as a route reflector.
If the clients of a route reflector are fully meshed, you can configure the route reflector to not
reflect routes to specified clients by using the
no bgp client-to-client
reflection
command.
Related
Commands bgp client-to-client reflection – enables route reflection between the route reflector and the
clients.
neighbor send-community
Send a COMMUNITY attribute to a BGP neighbor or peer group. A COMMUNITY attribute indicates that all routes with
that attribute belong to the same community grouping.
C-Series, E-Series, S-Series, Z-Series
Syntax neighbor { ip-address | peer-group-name } send-community
397