Dell Force10 S4810P, Справочное руководство

Страница: 904 / 1637

Version 7.4.1.0 Introduced on the E-Series TeraScale Added the
monitor
option.
deny
Configure a filter that drops IPv6 packets that match the filter criteria.
C-Series, E-Series, S-Series
Syntax deny { ipv6-protocol-number | icmp | ipv6 | tcp | udp}
To remove this filter, you have two choices:
• Use the
no seq sequence-number
command syntax if you know the filter’s
sequence number
• Use the
no deny {ipv6-protocol-number | icmp | ipv6 | tcp |
udp}
command
Parameters
ip-protocol-
number
Enter an IPv6 protocol number. The range is 0 to 255.
icmp Enter the keyword
icmp
to deny Internet Control Message Protocol
version 6.
ipv6 Enter the keyword
ipv6
to deny any Internet Protocol version 6.
tcp Enter the keyword
tcp
to deny the Transmission Control protocol.
udp Enter the keyword
udp
to deny the User Datagram Protocol.
Defaults Not configured.
Command Modes ACCESS-LIST
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series TeraScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale Added the
monitor
option.
deny icmp
Configure a filter to drop all or specific ICMP messages.
C-Series, E-Series, S-Series
Syntax deny icmp { source address mask | any | host ipv6-address }
{ destination address | any | host ipv6-address } [ message-type ]
[count [byte]] | [log] [monitor]
To remove this filter, you have two choices:
• Use the
no seq sequence-number
command syntax if you know the filter’s
sequence number
904