Dell Force10 S4810P, Справочное руководство

Страница: 836 / 1637

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0 Introduced on the E-Series.
Usage
Information You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when creating a
static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.
Related
Commands
clear arp-cache – clears dynamic ARP entries from the ARP table.
show arp – displays the ARP table.
arp backoff-time
Set the an exponential timer for resending unresolved ARPs.
Z-Series, S4810
Syntax arp backoff-time seconds
Parameters
seconds
Enter the number of seconds an ARP entry is black-holed. The range
is 1 to 3600. The default is 30.
Defaults 30
Command Mode CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information This timer is an exponential backoff timer. Over the specified period, the time between ARP
requests increases. This reduces the potential for the system to slow down while waiting for a
multitude of ARP responses.
Related
Commands show arp retries displays the configured number of ARP retries.
836