manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 1263

Parameters

interface

Enter the following keywords and slot/port or number information:

•

For a 1-Gigabit Ethernet interface, enter the keyword 

GigabitEthernet

 followed by the slot/port information.

•

For a Loopback interface, enter the keyword 

loopback 

followed by a number from 0 to 16383.

•

For a Port Channel interface, enter the keywords 

port-

channel

 followed by a number. For the E-Series, the range 

is 1 to 255 for TeraScale and 1 to 512 for ExaScale.

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by the slot/port 

information.

•

For a VLAN, enter the keyword 

vlan

 followed by a number 

from 1 to 4094.

priority-value

(OPTIONAL) Enter a number as the priority of this RP Candidate, 
which is included in the Candidate-RP-Advertisements. The range is 0 
(highest) to 255 (lowest).

Defaults

none

Command Modes

CONFIGURATION

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 7.4.1.0

Introduced

ipv6 pim sparse-mode

Enable IPv6 PIM sparse mode on the interface.

E-Series, S4810

Syntax

ipv6 pim sparse-mode

To disable IPv6 PIM sparse mode, use the 

no ipv6 pim sparse-mode

 command.

Defaults

Disabled.

Command Modes

INTERFACE

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 7.4.1.0

Introduced

Usage 
Information

The interface must be enabled (use the 

no shutdown

 command) and not have the 

switchport

 command configured. Multicast must also be enabled globally. PIM is 

supported on the port-channel interface.

1263

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды