Dell Force10 S4810P, Справочное руководство

Страница: 1042 / 1637

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
vlan
vlan-id
(OPTIONAL) Enter the keyword
vlan
followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
show mac-address-table
Display the MAC address table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show mac-address-table [dynamic | static] [address mac-address
| interface interface | vlan vlan-id ] [count [vlan vlan-id ]
[interface interface-type [ slot [ /port ]]]]
Parameters
dynamic (OPTIONAL) Enter the keyword
dynamic
to display only those MAC
addresses learned dynamically by the switch. Optionally, you can
also add one of these combinations:
address/ mac-address
,
interface/ interface
, or
vlan vlan-id
.
static (OPTIONAL) Enter the keyword
static
to display only those MAC
address specifically configured on the switch. Optionally, you can
also add one of these combinations:
address/ mac-address
,
interface/ interface
, or
vlan vlan-id
.
address mac-
address
(OPTIONAL) Enter the keyword
address
followed by a MAC
address in the nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
interface
interface
(OPTIONAL) Enter the keyword
interface
followed by the
interface type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
1042