Dell Force10 S4810P, Справочное руководство

Страница: 790 / 1637

Line Description
Hardware is... Interface hardware information, assigned MAC address, and current
address.
Pluggable media
present... Present pluggable media wavelength, type, and rate. The error
scenarios are:
• Wavelength, Non-qualified — Dell Force10 ID is not present,
but wavelength information is available from XFP or SFP
serial data
• Wavelength, F10 unknown—Dell Force10 ID is present, but
not able to determine the optics type
• Unknown, Non-qualified— if wavelength is reading error,
and F10 ID is not present
Dell Force10 allows unsupported SFP and XFP transceivers to be
used, but FTOS might not be able to retrieve some data about them.
In that case, typically when the output of this field is “Pluggable
media present, Media type is unknown”, the Medium and the
XFP/SFP receive power reading data might not be present in the
output.
Interface index... Displays the interface index number used by SNMP to identify the
interface.
Internet address... States whether an IP address is assigned to the interface. If an IP
address is assigned, that address is displayed.
MTU 1554... Displays link and IP MTU information.
LineSpeed Displays the interface’s line speed, duplex mode, and Slave.
ARP type:... Displays the ARP type and the ARP timeout value for the interface.
Last clearing... Displays the time when the
show interfaces
counters where
cleared.
Queuing strategy... States the packet queuing strategy. FIFO means first in first out.
Input Statistics: Displays all the input statistics including:
• Number of packets and bytes into the interface
• Number of packets with VLAN tagged headers
• Packet size and the number of those packets inbound to the
interface
• Number of Multicast and Broadcast packets:
– Multicasts = number of MAC multicast packets
– Broadcasts = number of MAC broadcast packets
• Number of runts, giants, and throttles packets:
– runts = number of packets that are less than 64B
– giants = packets that are greater than the MTU size
– throttles = packets containing PAUSE frames
• Number of CRC, overrun, and discarded packets:
790