Dell Force10 S4810P, Справочное руководство

Страница: 1241 / 1637

FTOS(conf)#int gig 1/1
FTOS(config-if-gi-1/1)# ip pim ingress-interface-map map1
ip pim neighbor-filter
Configure this feature to prevent a router from participating in protocol independent multicast (PIM).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip pim neighbor-filter { access-list }
To remove the restriction, use the
no ip pim neighbor-filter {access-list}
command.
Parameters
access-list Enter the name of a standard access list. Maximum 16 characters.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Version 7.6.1.0 Introduced on the E-Series.
Usage
Information Do not enter this command before creating the access-list.
ip pim query-interval
Change the frequency of PIM Router-Query messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip pim query-interval seconds
To return to the default value, use the
no ip pim query-interval seconds
command.
Parameters
seconds Enter a number as the number of seconds between router query
messages. The range: 0 to 65535. The default is 30 seconds.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
1241