Dell Force10 S4810P, Справочное руководство

Страница: 506 / 1637

neighbor distribute-list
Distribute BGP information via an established prefix list.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } distribute-list
prefix-list-name {in | out}
To delete a neighbor distribution list, use the
no neighbor { ipv6-address | peer-
group-name } distribute-list prefix-list-name {in | out}
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list. If you do not configure
the prefix list, the default is
permit
(to allow all routes).
in Enter the keyword
in
to distribute only inbound traffic.
out Enter the keyword
out
to distribute only outbound traffic.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information Other BGP filtering commands include the
neighbor filter-list
and
neighbor
route-map
commands.
Related
Commands
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map – assigns a route map to a neighbor or peer group.
neighbor ebgp-multihop
Attempt and accept BGP connections to external peers on networks that are not directly connected.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } ebgp-multihop [ ttl ]
To disallow and disconnect connections, use the
no neighbor { ipv6-address |
peer-group-name } ebgp-multihop [ ttl ]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
506