Dell Force10 S4810P, Справочное руководство

Страница: 1313 / 1637

of times relative to scheduling packets from the other queues using the Deficit Round Robin
method.
NOTE: This command is not available on the S4810. Use the
bandwidth-percentage
command.
Related
Commands qos-policy-output – creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality of service policies to
each class.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax class-map {match-all | match-any} class-map-name [layer2]
Parameters
match-all Determines how packets are evaluated when multiple match criteria
exist. Enter the keywords
match-all
to determine that the packets
must meet all the match criteria in order to be considered a member
of the class.
match-any Determines how packets are evaluated when multiple match criteria
exist. Enter the keywords
match-any
to determine that the packets
must meet at least one of the match criteria in order to be considered
a member of the class.
class-map-name Enter a name of the class for the class map in a character format (32
character maximum).
layer2 Enter the keyword
layer2
to specify a Layer 2 Class Map. The
default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Class-map names can be 32 characters. Layer2 available on the C-
Series and S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
Usage
Information
Packets arriving at the input interface are checked against the match criteria and configured
using this command to determine if the packet belongs to that class. This command accesses
CLASS-MAP mode, where the configuration commands include the
match ip
and
match
mac
options.
1313