manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 359

Version 8.3.7.0

Introduced on the S4810.

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series.

Usage 
Information

When a BGP cluster contains only one route reflector, the cluster ID is the route reflector’s 
router ID. For redundancy, a BGP cluster may contain two or more route reflectors. Assign a 
cluster ID with the 

bgp cluster-id

 command. Without a cluster ID, the route reflector 

cannot recognize route updates from the other route reflectors within the cluster.
The default format for displaying the cluster-id is dotted decimal, but if you enter the cluster-id 
as an integer, it is displayed as an integer.

Related 
Commands

bgp client-to-client reflection

 – enables route reflection between the route reflector and 

clients.

neighbor route-reflector-client

 – configures a route reflector and clients.

show ip bgp cluster-list

 – views paths with a cluster ID.

bgp confederation identifier

Configure an identifier for a BGP confederation.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

bgp confederation identifier 

as-number

To delete a BGP confederation identifier, use the 

no bgp confederation 

identifier as-number

 command.

Parameters

as-number

Enter the AS number. The range is 0 to 65535 (2-byte), 1 to 4294967295 
(4-byte), or 0.1 to 65535.65535 (dotted format).

Defaults

Not configured.

Command Modes

ROUTER BGP

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series. Added support for the 4-byte format

Usage 
Information

You must configure your system to accept 4-byte formats before entering a 4-byte AS number. 
All the routers in the Confederation must be 4– or 2-byte identified routers. You cannot mix 
them.
The autonomous systems configured in this command are visible to the EBGP neighbors. Each 
autonomous system is fully meshed and contains a few connections to other autonomous 
systems. The next hop, MED, and local preference information is preserved throughout the 
confederation.

359

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды