Dell Force10 S4810P, Справочное руководство

Страница: 115 / 1637

E-Series Original command.
Usage
Information Users entering EXEC Privilege mode or any other configured privilege level can access
configuration commands. To protect against unauthorized access, use the
enable
password
command to configure a password for the
enable
command at a specific
privilege level. If no privilege level is specified, the default is privilege level 15.
Related
Commands enable password – configures a password for the
enable
command and to access a
privilege level.
enable optic-info-update interval
Enable polling intervals of optical information updates for simple network management protocol (SNMP).
Z-Series, S4810
Syntax enable optical-info-update interval seconds
To disable optical power information updates, use the
no enable optical-info-
update interval
command.
Parameters
interval
seconds
Enter the keyword
interval
followed by the polling interval in
seconds. Range: 120 to 6000 seconds. Default: 300 seconds (5
minutes).
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 8.3.11.4 Introduced on the Z9000 to replace the
enable xfp-power-
updates
command.
Version 8.3.10.0 Replacement command for the S4810 only. Replaces the
enable
xfp-power-updates
command.
Usage
Information Use this command to enable polling and to configure the polling frequency.
enable xfp-power-updates
Enable 10–gigabit small form-factor pluggable (XFP) power updates for SNMP.
C-Series, E-Series, S-Series
Syntax enable xfp-power-updates interval seconds
115