Dell Force10 S4810P, Справочное руководство

Страница: 1095 / 1637

ip msdp sa-filter
Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specified peer.
E-Series, Z-Series, S4810
Syntax ip msdp sa-filter {in | out} peer-address list [access- list
name ]
Remove this configuration using the
no ip msdp sa-filter {in | out} peer
address list [access- list name ]
command.
Parameters
in Enter the keyword
in
to enable incoming SA filtering.
out Enter the keyword
out
to enable outgoing SA filtering.
peer-address
Enter the peer address of the MSDP peer in a dotted decimal format
(A.B.C.D.).
access-list name
Enter the name of an extended ACL that contains permitted SAs. If
you do not use this option, all local entries are blocked.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the E-Series.
ip msdp sa-limit
Configure the upper limit of source-active (SA) entries in SA-cache.
E-Series, Z-Series, S4810
Syntax ip msdp sa-limit number
To return to the default, use the
no ip msdp sa-limit number
command.
Parameters
number Enter the maximum number of SA entries in SA-cache. The range is 0
to 40000.
Defaults 50000
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
1095