Dell Force10 S4810P, Справочное руководство

Страница: 516 / 1637

neighbor shutdown
Disable a BGP neighbor or peer group.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } shutdown
To enable a disabled neighbor or peer group, use the
no neighbor { ipv6-address |
peer-group-name } shutdown
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to disable or enable all routers
within the peer group.
Defaults Enabled (that is, BGP neighbors and peer groups are disabled.)
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
Peers that are enabled within a peer group are disabled when their peer group is disabled.
The
neighbor shutdown
command terminates all BGP sessions on the BGP neighbor or
BGP peer group. Use this command with caution as it terminates the specified BGP sessions.
When a neighbor or peer group is shutdown, use the
show ip bgp summary
command to
confirm its status.
Related
Commands
• show ip bgp summary – displays the current BGP configuration.
• show ip bgp neighbors – displays the current BGP neighbors.
neighbor soft-reconfiguration inbound
Enable a BGP soft-reconfiguration and start storing updates for inbound IPv6 unicast routes.
C-Series, E-Series TeraScale, S4810
Syntax neighbor { ipv4-address | ipv6-address | peer-group-name } soft-
reconfiguration inbound
Parameters
ipv4-address
|
ipv6-address
Enter the IP address of the neighbor for which you want to start
storing inbound routing updates.
peer-group-name
Enter the name of the peer group for which you want to start storing
inbound routing updates.
516