Dell Force10 S4810P, Справочное руководство

Страница: 518 / 1637

neighbor timers
Set keepalive and hold time timers for a BGP neighbor or a peer group.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } timers keepalive
holdtime
To return to the default values, use the
no neighbor { ipv6-address | peer-
group-name } timers
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to set the timers for all routers
within the peer group.
keepalive
Enter a number for the time interval, in seconds, between keepalive
messages sent to the neighbor routers. The range is 1 to 65535. The
default is 60 seconds.
holdtime
Enter a number for the time interval, in seconds, between the last
keepalive message and declaring the router dead. The range is 3 to
65535. The default is 180 seconds.
Defaults
•
keepalive
= 60 seconds
•
holdtime
= 180 seconds
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
Timer values configured with the
neighbor timers
command override the timer values
configured with the
timers bgp
command.
When two neighbors, configured with different
keepalive
and
holdtime
values,
negotiate for new values, the resulting values are as follows:
• the lower of the
holdtime
values is the new
holdtime
value, and
• whichever is the lower value; one-third of the new
holdtime
value, or the
configured
keepalive
value is the new keepalive value.
518