Dell Force10 S4810P, Справочное руководство

Страница: 1615 / 1637

Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
debug vrrp
Allows you to enable debugging of VRRP.
C-Series, E-Series, Z-Series
Syntax debug vrrp interface [ vrrp-id ] {all | database |interface ||
packets | state | timer}
To disable debugging, use the
no debug vrrp interface [ vrrp-id ] {all |
database| interface| packets | state | timer}
command.
Parameters
interface Enter the following keywords and slot/port or number information
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keywords
port-
channel
followed by the number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet
followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a VLAN interface, enter the keyword
vlan
followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword
all
to enable debugging of all VRRP groups.
database Enter the keyword
database
to enable configuration to change
information.
interface Enter the keyword
interface
to enable interface state to
information.
packets Enter the keyword
packets
to enable debugging of VRRP control
packets.
1615