Dell Force10 S4810P, Справочное руководство

Страница: 407 / 1637

match external {1
| 2} (OPTIONAL) Enter the keywords
match external
to redistribute
OSPF external routes. You can specify
1
or
2
to redistribute those
routes only.
match internal (OPTIONAL) Enter the keywords
match internal
to redistribute
OSPF internal routes only.
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
followed by the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced the ability to substitute IGP cost for MED when a peer/
peer-group outbound route-map is set as internal.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
With FTOS version 8.3.1.0 and later, you can use the
redistribute
command to advertise
the IGP cost as the MED on redistributed routes. When you set the route-map with metric-type
internal and apply outbound to an EBGP peer/peer-group, the advertised routes corresponding
to those peer/peer-group have the IGP cost set as MED.
When you enter the
redistribute isis process-id
command without any other
parameters, FTOS redistributes all OSPF internal routes, external type 1 routes, and external
type 2 routes. This feature is not supported by an RFC.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax router bgp as-number
To disable BGP, use the
no router bgp as-number
command.
Parameters
as-number
Enter the AS number. The range is 1 to 65535 (2-byte), 1 to 4294967295
(4-byte), or 0.1 to 65535.65535 (dotted format).
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
407