Dell Force10 S4810P, Справочное руководство

Страница: 393 / 1637

A neighbor may keep its configuration after it was added to a peer group if the neighbor’s
configuration is more specific than the peer group’s, and the neighbor’s configuration does not
affect outgoing updates.
A peer group must exist before you add a peer to it. If the peer group is disabled (shutdown)
the peers within the group are also disabled (shutdown).
Related
Commands
clear ip bgp – resets BGP sessions.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp peer-group – views BGP peers.
show ip bgp neighbors – views BGP neighbors configurations.
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor peer-group-name peer-group
To delete a peer group, use the
no neighbor peer-group-name peer-group
command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer
group.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information When you create a peer group, it is disabled (Shut mode).
Related
Commands
neighbor peer-group (assigning peers) – assigns routers to a peer group.
neighbor remote-as – assigns a indirectly connected AS to a neighbor or peer group.
neighbor shutdown – disables a peer or peer group.
393