Dell Force10 S4810P, Справочное руководство

Страница: 1627 / 1637

• track
• virtual-address
clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
C-Series, E-Series, S-Series, S4810
Syntax clear counters vrrp ipv6 [ vrid | vrf instance ]
Parameters
vrid
(OPTIONAL) Enter the number of an IPv6 VRRP group. The range is 1
to 255.
vrf
instance
(OPTIONAL) E-Series only: Enter the name of a VRF instance (32
characters maximum) to clear the counters of all IPv6 VRRP groups in
the specified VRF.
Command Modes EXEC Privilege
Command History
Version 8.4.1.0 Introduced on E-Series ExaScale, C-Series, and S-Series. Support
was added for IPv6 VRRP groups in non-default VRF instances.
Version 8.3.10.0 Introduced on the S4810.
Version 8.3.2.0 Introduced on the E-Series TeraScale.
debug vrrp ipv6
Allows you to enable debugging of VRRP.
C-Series, E-Series, S-Series, S4810
Syntax debug vrrp ipv6 interface [ vrid ] {all | packets | state |
timer}
Parameters
interface
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the E-Series, the range
is 1 to 255 for TeraScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a VLAN interface, enter the keyword
vlan
followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.
vrid
(OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword
all
to enable debugging of all VRRP groups.
1627