Dell Force10 S4810P, Справочное руководство

Страница: 66 / 1637

• For a file on an FTP server, enter ftp://
user:password@hostip/
filepath
• For a file on a TFTP server, enter tftp:// hostip/filepath
Defaults none
Command Modes CONFIGURATION
Command History
Version 7.5.1.0 Introduced on C-Series
E-Series Original command
Usage
Information To display these changes in the
show bootvar
command output, save the running
configuration to the startup configuration (using the
copy
command).
Related
Commands show bootvar – displays the variable settings for the E-Series boot parameters.
boot system (S4810 and Z9000)
Tell the system where to access the FTOS image used to boot the system.
Z-Series, S4810
Syntax
This command was deprecated in FTOS 8.3.12.0.
boot system {gateway ip address | stack-unit [{ 0-11 | 0-7 ]| all ]
[default | primary { system { A: | B: } | tftp: | | secondary]}
To return to the default boot sequence, use the
no boot system
command.
Parameters
gateway Enter the IP address of the default next-hop gateway for the
management subnet.
stack-unit Enter the stack-unit number for the master switch.
ip-address
Enter an IP address in dotted decimal format.
0-11, 0-7, all
Enter the stack-unit number. The S4810 range is 0 to 11. The Z9000
range is 0 to 7.
default Enter the keyword
default
to use the primary FTOS image.
primary Enter the keyword
primary
to use the primary FTOS image.
secondary Enter the keyword
secondary
to use the primary FTOS image.
tftp: Enter the keyword
TFTP:
to retrieve the image from a TFTP server.
tftp://hostip/filepath.
A:
|
B:
Enter
A:
or
B:
to boot one of the system partitions.
Defaults Not configured.
66