manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 856

Defaults

Not configured.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.0

Introduced for the E-Series.

ip max-frag-count

Set the maximum number of fragments allowed in one packet for packet re-assembly.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

ip max-frag-count 

count

To place no limit on the number of fragments allowed, use the 

no ip max-frag-count 

command.

Parameters

count

Enter a number for the number of fragments allowed for re-assembly. 
The range is 2 to 256.

Defaults

No limit is set on number of fragments allowed.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.0

Introduced for the E-Series.

Usage 
Information

To avoid denial of service (DOS) attacks, keep the number of fragments allowed for re-
assembly low.

856

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды