Dell Force10 S4810P, Справочное руководство

Страница: 519 / 1637

neighbor update-source
Enable the E-Series software to use Loopback interfaces for TCP connections for BGP sessions.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } update-source
loopback interface
To use the closest interface, use the
no neighbor { ipv6-address | peer-
group-name } update-source loopback interface
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to disable all routers within the peer
group.
loopback
interface
Enter the keyword
loopback
followed by a number of the loopback
interface. The range is 0 to 16383.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information Loopback interfaces are up constantly and the BGP session may need one interface constantly
up to stabilize the session. The
neighbor update-source
command is not necessary for
directly connected internal BGP sessions.
neighbor weight
Assign a weight to the neighbor connection, which is used to determine the best path.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } weight weight
To remove a weight value, use the
no neighbor { ipv6-address | peer-group-
name } weight weight
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group to disable all routers within the peer
group.
519