Dell Force10 S4810P, Справочное руководство

Страница: 860 / 1637

pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information This command is available for physical interfaces and port-channel interfaces on the E-Series.
NOTE: This command is not supported on default VLAN (the
default vlan-id
command).
ip route
Assign a static route to the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip route vrf { vrf instance } destination mask { ip-address |
interface [ ip-address ]} [ distance ] [permanent] [tag tag-value ]
To delete a specific static route, use the
no ip route destination mask
{ address | interface [ ip-address ]}
command.
To delete all routes matching a certain route, use the
no ip route destination
mask
command.
Parameters
vrf name (OPTIONAL) E-Series Only: Enter the keyword
vrf
followed by the
VRF Instances name to tie the static route to the VRF instance.
destination
Enter the IP address in dotted decimal format of the destination
device.
mask
Enter the mask in slash prefix formation (/x) of the destination
device’s IP address.
ip-address
Enter the IP address in dotted decimal format of the forwarding
router.
interface
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a loopback interface, enter the keyword
loopback
followed by a number from zero (0) to 16383.
• For the null interface, enter the keyword
null
followed by
zero (0).
• For a Port Channel interface, enter the keyword
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the sonet followed by the slot/port information.
860