Dell Force10 S4810P, Справочное руководство

Страница: 1360 / 1637

Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan
followed by a number
from 1 to 4094.
connected (OPTIONAL) Enter the keyword
connected
to filter only directly
connected routes.
isis (OPTIONAL) Enter the keyword
isis
to filter only IS-IS routes.
NOTE: This option is only available on E-Series.
ospf (OPTIONAL) Enter the keyword
ospf
to filter all OSPF routes.
static (OPTIONAL) Enter the keyword
static
to filter manually configured
routes.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Related
Commands ip prefix-list – enters PREFIX-LIST mode and configures a prefix list.
ip poison-reverse
Set the prefix of the RIP routing updates to the RIP infinity value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip poison-reverse
To disable poison reverse, use the
no ip poison-reverse
command.
1360