Dell Force10 S4810P, Справочное руководство

Страница: 1157 / 1637

distribute-list out
Apply a filter to restrict certain routes destined for the local routing table after the SPF calculation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax distribute-list prefix-list-name out [bgp | connected | isis |
rip | static]
To remove a filter, use the
no distribute-list prefix-list-name out [bgp
| connected | isis | rip | static]
command.
Parameters
prefix-list-name
Enter the name of a configured prefix list.
bgp (OPTIONAL) Enter the keyword
bgp
to specify that BGP routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
connected (OPTIONAL) Enter the keyword
connected
to specify that
connected routes are distributed.
isis (OPTIONAL) Enter the keyword
isis
to specify that IS-IS routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
rip (OPTIONAL) Enter the keyword
rip
to specify that RIP routes are
distributed.
NOTE: BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
static (OPTIONAL) Enter the keyword
static
to specify that only manually
configured routes are distributed.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
1157